{
  "status": "PASS_DIGITAL_QUOTE_CHECKS",
  "pcb_sha256": "0af25f8f72fb999db1bad16a8d59541a02c4eb95f838ada6dd6abadba8fe058d",
  "ERC_violations": 0,
  "DRC_violations": 0,
  "unconnected_items": 0,
  "schematic_parity_issues": 0,
  "independent_pin_oracle": "PASS",
  "pads": 126,
  "CAM_pad_flashes": 222,
  "CAM_native_tracks": 252,
  "CAM_drills": 192,
  "CAM_outline_endpoint_degree_2_within_0p1um": true,
  "CAM_outline_max_endpoint_gap_mm": 7.000000000090267e-05,
  "cut_checks": [],
  "fabrication_layers": {
    "led-upper-v0.3-B_Cu.gbr": {
      "objects": 426,
      "bounds_mm": [
        [
          20.726898000000002,
          -47.7
        ],
        [
          344.241657,
          -5.0
        ]
      ]
    },
    "led-upper-v0.3-B_Mask.gbr": {
      "objects": 127,
      "bounds_mm": [
        [
          20.776898000000003,
          -47.650000000000006
        ],
        [
          344.19165699999996,
          -5.0
        ]
      ]
    },
    "led-upper-v0.3-Edge_Cuts.gbr": {
      "objects": 794,
      "bounds_mm": [
        [
          19.985,
          -47.91505
        ],
        [
          344.98360000645334,
          -4.984978
        ]
      ]
    },
    "led-upper-v0.3-F_Cu.gbr": {
      "objects": 240,
      "bounds_mm": [
        [
          20.726898000000002,
          -47.7
        ],
        [
          344.241657,
          -40.324999999999996
        ]
      ]
    },
    "led-upper-v0.3-F_Mask.gbr": {
      "objects": 96,
      "bounds_mm": [
        [
          20.776898000000003,
          -47.650000000000006
        ],
        [
          344.19165699999996,
          -46.75
        ]
      ]
    },
    "led-upper-v0.3-F_Silkscreen.gbr": {
      "objects": 1865,
      "bounds_mm": [
        [
          22.838749,
          -46.173855
        ],
        [
          342.167902,
          -11.803854999999999
        ]
      ]
    }
  },
  "physical_copper_layers": 2,
  "limitations": [
    "Factory stackup, coverlay registration, pad process and tolerances require review.",
    "Physical fit, solderability, temperature, CAN/motor behavior and assembled insulation are not proven by CAD."
  ],
  "CAM_check_note": "Fresh snapshot rerun of original flash/track/drill checker; all 30 J100 contacts are B-only. Independent physical-CAM installed topology is separate."
}